Choosing an Explorer Yacht Tender: Types, Sizes and Launch Systems

October 15, 2026

The Boat Behind the Boat

How to choose the right tender for an explorer yacht, from RIBs and limousine tenders to sizing, propulsion and safe launch and recovery.

Why the Tender Matters

On an explorer yacht, the tender is not an accessory. It carries guests to beaches with no jetty, collects fresh provisions from a village pier, takes divers to a reef beyond the anchorage and, if the weather turns, brings everyone back aboard quickly and dry. The further a yacht travels from marinas, the more each day depends on the small boat rather than the large one. Choosing an explorer yacht tender is really a decision about how an owner will use remote places, not simply about what fits on deck.

The Main Types of Tender

Most explorer programmes rely on a combination of boats, each suited to a different job.

  • Rigid inflatable boats: the workhorse. Buoyant tubes make a RIB forgiving alongside the yacht and in a swell, and it handles beach landings well. Ideal for crew runs, diving and trips ashore.
  • Limousine tenders: an enclosed cabin keeps guests warm and dry, which matters far more in high latitudes than in the Mediterranean. They are heavier and need more deck space and lifting capacity.
  • Landing craft: a bow ramp lets guests, bicycles or equipment step straight onto a beach.
  • Chase boats: a larger, independent boat that runs alongside the yacht rather than being carried on it, adding range and speed for day trips well away from the anchorage.

Sizing and Seaworthiness

A primary tender should carry every guest plus crew in a single trip, with spare capacity for luggage, dive kit or provisions. In exposed anchorages it may need to cover several miles to shore in a short, steep chop, so hull form and freeboard count as much as seating. A deeper V hull rides better in open water; a flatter one reaches more beaches. Many owners pair a capable RIB with a smaller, lighter boat for quick crew runs and calm days.

Propulsion deserves the same thought. Outboards are lighter to lift and simpler to service in remote ports, while water jets suit shallow landings and operating around swimmers. Running the tenders on the same fuel as the yacht also simplifies logistics on long passages.

Launch and Recovery

A tender is only as useful as the system that puts it in the water. Deck cranes, garages and hydraulic platforms each have their place, but the real test is whether the crew can launch and recover safely at anchor in a swell, not just in a calm harbour. Crane capacity should cover the heaviest boat at the reach required, with a margin. Recovery is usually the harder half of the operation, often at the end of a long day with the light fading, so crew training and clear procedures belong in the specification too.

Practical Considerations

  • Stowage: secure, chocked positions protect boats from green water on passage.
  • Safety kit: a VHF radio, navigation lights, a chartplotter, first aid kit and spare fuel turn a tender into a self-reliant small vessel.
  • Local rules: limits on speed, landings and wildlife disturbance vary widely, particularly in polar and protected waters.
  • Spares: carry parts for the tenders as you would for the yacht. A failed engine in a remote bay can end the day’s plans.

The people who drive these boats matter as much as the hardware, a subject we explore in Who Crews an Explorer Yacht?

How Lynx Plans for Tenders

At Lynx Yachts, space for tenders and toys is a starting point of the design rather than an afterthought. The YXT Series, built by Lynx for Outer Reef, takes that idea furthest. The YXT 20 pairs a 45 square metre main deck with two cranes: a primary crane lifting 1.7 tonnes at a five metre reach with full rotation, and a 0.5 tonne crane at the stern serving the beach club. On the YXT 34, 145 square metres of main deck can hold a large RIB, a limousine tender, four Wave Runners and a submarine at the same time, handled by a knuckle boom crane rated at 15.2 tonnes at 3.5 metres and 4.2 tonnes at 11.4 metres.

For owners who want that utility alongside more guest space, the Crossover 27 offers a 70 square metre main deck that stows multiple tenders and toys, then clears to become an open space for entertaining. For a fast, independent chase boat, the Audace 50 reaches a top speed of 38 knots.

To discuss the right tender arrangement for your next voyage, contact the Lynx Yachts team.